VPL-VW285ES
Sony 4K HDR Home Theater Projector
Enjoy up to 200 inches in True 4K HDR in any room.1 With more than four times the resolution of Full HD, 4K delivers a picture that’s so incredibly lifelike, it’s like being in the scene or at the game. Experience the latest HDR content with an extremely wide contrast range and a greater volume of colors.
Size & Weight
Dimensions (W x H x D)
19 1/2" x 7 11/16" x 18 1/4"
Weight
Approx. 31 lb (14 kg)
Display
Display System
4K SXRD panel, projection system
Display Resolution *1
Computer signal input: Maximum display resolution: 1920 x 1080 dots (HDMI Input only) / Video signal input: 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p*1, 3840 x 2160/60p*1, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096 x 2160/50p*1, 4096 x 2160/60p*2
Light source
High-pressure mercury lamp, 225 W type
General Features
Effective Imager Size
0.74 in x 3
Effective pixels
26,542,080 (4096 x 2160 x 3) pixels
Projection lens shift
Vertical: +85% -80% Horizontal: +/-31%
SCREEN SIZE
60" to 300" (1,524 mm to 7,620 mm)
Hardware
Projection lens zoom / focus
Powered (Approx. x2.06)
Interface
Input and Output Terminals
HDMI (2 INPUTS)*3 - Digital RGB/Y Pb/Cb Pr/Cr, IR IN - Minijack, LAN - RJ45, 10Base-T/100BASE-TX, REMOTE - RS-232C, D-sub 9-pin (female), TRIGGER(2 INPUTS) - Minijack, DC 12 V Max. 100 mA, USB - DC 5 V, Max. 500 mA
Operating Conditions
Operating temperature / humidity
41 °F to 95 °F (5 °C to 35 °C)/20% to 80% (no condensation)
Storage temperature / humidity
-10°F to +140°F (14°C to +60°C)/20% to 80% (no condensation)
Power
Acoustic noise
26 dB
Power requirement
AC100 V to 240 V, 3.5 A to 1.5 A, 50/60 Hz
Power consumption
350 W
Video Features
Light Output
1500 lm (Lamp mode: High)
*4
Color Light Output
1500 lm (Lamp mode: High)
*4
Eco and energy saving
Power Consumption (Standby Mode)
0.3 W (when "Remote Start" is set to "Off")
Power Consumption (Networked Standby Mode)
1.0 W (LAN) (when "Remote Start" is set to "On") When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W).
Standby Mode Activated
After about 10 Minutes